Image 1/1:

Add Comment

Image 1/2: Read the chapters ''3.2 Disclaimer'' and'' 3.3 Safety instructions'' Image 2/2: Read the chapter ''6.3 Setup before printing''.
  • See our free 3D Printing Handbook - http://www.prusa3d.com/3dhandbookMK2

  • Read the chapters 3.2 Disclaimer and 3.3 Safety instructions

  • Read the chapter 6.3 Setup before printing.

  • Download and install the drivers - chapter 8 Printer drivers. Don't forget we have ready to print settings for Slic3r, Cura, Simplify3D and KISSlicer.

  • Calibrate the printer by following the chapter 6.3.1 Calibration flow. Please follow the steps exactly, otherwise you can permanently damage the print surface!

Add Comment

Image 1/1: '''Congratulations! You should be ready to print by now ;-)'''
  • Read the chapter 7 Printing of 3D Printing Handbook.

  • Congratulations! You should be ready to print by now ;-)

  • You can start by printing some of our test objects bundled on the included SD card - you can check them out here prusa3d.com/printable-3d-models

Add Comment

Image 1/1:
  • If you encounter any problems at all, don't forget you can always check out our knowledge base at http://help.prusa3d.com. We're adding new topics every day!

Add Comment

Image 1/1: Account is shared with http://shop.prusa3d.com/

Add Comment

Finish Line

Josef Prusa

Member since: 01/05/2015

50,666 Reputation

110 Guides authored

Team

Prusa Research Member of Prusa Research

Community

1 Member

110 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 76

All Time: 485