Skip to main content

Changes to Step #21

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] Filament sensor cable (optional)
-[* icon_caution] ***Following instructions are ONLY for users with RAMBo Mini 10a!!!*** In case you board is different, please skip this step.
+[* icon_caution] ***Following instructions are ONLY for users with Mini-RAMBo 1.0a!!!*** In case you board is different, please skip this step.
[* green] Carefully insert the tip in the slot for the blue wire and lift the black plastic safety pin.
[* orange] While the safety pin is up, pull the blue wire gently out.
[* violet] Insert the blue wire in the empty slot on the right, mind the correct "rotation" of the steel pin on the wire.
[* yellow] Ensure the wire is fully inserted and proceed with the assembly.