Changes to Step #21
Edit by Jakub Dolezal —
Edit approved by Jakub Dolezal
- Before
- After
- Unchanged
Step Lines
- | [title] Filament sensor cable ( |
---|---|
+ | [title] Filament sensor cable (only RAMBo 1.0a) |
[* icon_caution] ***Following instructions are ONLY for users with Mini-RAMBo 1.0a!!!*** In case you board is different, please skip this step. | |
[* green] Carefully insert the tip in the slot for the blue wire and lift the black plastic safety pin. | |
[* orange] While the safety pin is up, pull the blue wire gently out. | |
[* violet] Insert the blue wire in the empty slot on the right, mind the correct "rotation" of the steel pin on the wire. | |
[* yellow] Ensure the wire is fully inserted and proceed with the assembly. |