Skip to main content

Changes to Step #3

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

+[title] RAMBo cover disassembly (part 1)
+[* icon_note] For MK2.5 there is a redesigned RAMBo cover case and door. In the following steps we will remove the older one completely. ***Proceed with caution, as you might break the cables.***
+[* blue] Release upper two M3x10 screws holding the RAMBo board together with the RAMBo cover.
+[* violet] Release lower two M3x10 screws holding the RAMBo board together with the RAMBo cover.