Skip to main content

Changes to Step #4

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] RAMBo cover disassembly (part 2)
[* green] Slightly release two M3x10 screws holding the RAMBo cover on the frame. ***DO NOT*** unscrew them completely!!!
[* violet] Carefully slide the RAMBo cover from the frame. Plugged cables won't allow you more than few centimetres.
-[* black] Separate the cover from the EINSY board.
+[* black] Separate the cover from the RAMBo board.