Skip to main content

Changes to Step #2

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] RAMBo door disassembly
[* icon_note] For MK2.5 there is a redesigned RAMBo cover case and door. In the following steps we will remove the older parts completely. ***Proceed with caution, as you might break the cables.***
[* icon_caution] ***MAKE SURE*** you won't mix old and new parts!!! Their design is sometimes similar.
-[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the upper hinge.
-[* black] Remove to the RAMBO cover door.
-[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the lower hinge.
+[* light_blue] Using 2.5mm Allen key, remove the M3x10 screw together with the upper hinge.
+[* yellow] Remove to the RAMBO cover door.
+[* green] Using 2.5mm Allen key, remove the M3x10 screw together with the lower hinge.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added