Skip to main content

Changes to Step #2

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] RAMBo door disassembly
-[* black] Insert wisdom here.
+[* icon_note] For MK2.5 there is a redesigned RAMBo cover case and door. In the following steps we will remove the older one completely. ***Proceed with caution, as you might break the cables.***
+[* icon_caution] ***MAKE SURE*** you won't mix old and new parts!!! Their design is sometimes similar, but not the same.
+[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the upper hinge.
+[* black] Remove to the RAMBO cover door.
+[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the lower hinge.