Skip to main content

Changes to Step #2

Edit by TestingPrusaResearch

Edit approved by TestingPrusaResearch

Before
After
Unchanged

Step Lines

[title] RAMBo door disassembly
-[* icon_note] For MK2.5 there is a redesigned RAMBo cover case and door. In the following steps we will remove the older one completely. ***Proceed with caution, as you might break the cables.***
-[* icon_caution] ***MAKE SURE*** you won't mix old and new parts!!! Their design is sometimes similar, but not the same.
+[* icon_note] For MK2.5 there is a redesigned RAMBo cover case and door. In the following steps we will remove the older parts completely. ***Proceed with caution, as you might break the cables.***
+[* icon_caution] ***MAKE SURE*** you won't mix old and new parts!!! Their design is sometimes similar.
[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the upper hinge.
[* black] Remove to the RAMBO cover door.
[* black] Using 2.5mm Allen key, remove the M3x10 screw together with the lower hinge.