Skip to main content

Changes to Step #11

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

+[title] Preparing the lower hinge
+[* green] Take the RAMBo-cover-hinge-bottom and push M3x10 screw through.
+[* icon_note] Note there is a cutout for the screw's head in the printed part.
+[* yellow] Locate the hole for the lower hinge.
+[* light_blue] Place the hinge on the frame and tighten the screw. The hinge must be facing upwards.

Image 1

No previous image

Added