Skip to main content

Changes to Step #7

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

+[title] Preparing the RAMBo-cover-base (part 2)
+[* green] Insert four M3n nuts in nut traps.
+[* yellow] Slide RAMBo inside the base and tighten it with four M3x10 screws.
+[* icon_caution] Tighten the screws carefully, you can damage the board.
+[* icon_note] Use the needle nose pliers to help with positioning the screws.