Skip to main content

Changes to Step #14

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] Connecting the heatbed cable bundle (part 1)
[* black] For the following steps please prepare:
-[* black] Rambo-heatbed-cable-clip (1x)
-[* black] M3x10 screw (2x)
-[* black] M3n nut (2x)
-[* black] Press the cable bundle from the heatbed in the hole on RAMBo-cover-base. Make sure the textile sleeve is partly in.
+[* green] Rambo-heatbed-cable-clip (1x)
+[* orange] M3x10 screw (2x)
+[* blue] M3n nut (2x)
+[* yellow] Press the cable bundle from the heatbed in the hole on RAMBo-cover-base. Make sure the textile sleeve is partly inside the cover.

Image 1

No previous image

Added

Image 2

No previous image

Added