Skip to main content

Changes to Step #14

Edit by TestingPrusaResearch

Edit approved by TestingPrusaResearch

Before
After
Unchanged

Step Lines

[title] Connecting the heatbed cable bundle (part 1)
[* black] For the following steps please prepare:
-[* green] Rambo-heatbed-cable-clip (1x)
+[* yellow] Rambo-heatbed-cable-clip (1x)
[* orange] M3x10 screw (2x)
[* blue] M3n nut (2x)
-[* yellow] Press the cable bundle from the heatbed in the hole on RAMBo-cover-base. Make sure the textile sleeve is partly inside the cover.
+[* violet] Press the cable bundle from the heatbed in the hole on RAMBo-cover-base. Make sure the textile sleeve is partly inside the cover.

Image 1

Old Version

New Version

Image 2

Old Version

New Version