Skip to main content

Changes to Step #15

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal


Step Lines

[title] Connecting the heatbed cable bundle (part 2)
[* yellow] Insert both M3n nuts in the traps on the RAMBo-cover-base, see the picture. Make sure the nuts are all the way in.
[* green] Take the Rambo-heatbed-cable-clip and press it against the heatbed cable bundle.
[* light_blue] Using M3x10 screws fix the clip in place, tighten both screws equally.
+[* icon_note] If you can't reach the nuts, use temporarily longer screws, from the spare bag.