Skip to main content

Changes to Step #17

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] Connecting the extruder cable bundle (part 1)
[* black] For the following steps please prepare:
[* black] Rambo-extruder-cable-clip (1x)
[* black] M3x10 screw (2x)
[* black] M3n nut (2x)
+[* icon_caution] PINDA cable
+[* icon_caution] LEFT fan cable
[* black] Press the cable bundle from the heatbed in the hole on RAMBo-cover-base. Make sure the textile sleeve is partly in.