Skip to main content

Changes to Step #17

Edit by TestingPrusaResearch

Edit approved by TestingPrusaResearch

Before
After
Unchanged

Step Lines

[title] Connecting the extruder cable bundle (part 1)
[* black] For the following steps please prepare:
-[* black] Rambo-extruder-cable-clip (1x)
-[* black] M3x10 screw (2x)
-[* black] M3n nut (2x)
+[* violet] Rambo-extruder-cable-clip (1x)
+[* green] M3x10 screw (2x)
+[* orange] M3n nut (2x)
[* green] P.I.N.D.A. probe v-cable (1x)
[* light_blue] Left hotend fan v-cable (1x)