Skip to main content

Changes to Step #19

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal

Before
After
Unchanged

Step Lines

[title] Connecting the extruder cable bundle (part 2)
-[* black] Insert both M3n nuts in the traps on the RAMBo-cover-base, see the picture. Make sure the nuts are all the way in.
-[* black] Take the Rambo-extruder-cable-clip and press it against the heatbed cable bundle.
-[* black] Using M3x10 screws fix the clip in place, tighten both screws equally.
+[* light_blue] Insert both M3n nuts in the traps on the RAMBo-cover-base, see the picture. Make sure the nuts are all the way in.
+[* green] Take the Rambo-extruder-cable-clip and press it against the heatbed cable bundle.
+[* orange] Using M3x10 screws fix the clip in place, tighten both screws equally.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added