Skip to main content

Changes to Step #19

Edit by Jakub Dolezal

Edit approved by Jakub Dolezal


Step Lines

+[title] Connecting the extruder cable bundle (part 2)
+[* black] Insert both M3n nuts in the traps on the RAMBo-cover-base, see the picture. Make sure the nuts are all the way in.
+[* black] Take the Rambo-extruder-cable-clip and press it against the heatbed cable bundle.
+[* black] Using M3x10 screws fix the clip in place, tighten both screws equally.